Myco Standard Swivel Bather

The Swivel Bather is a turning bath seat that allows easy transfer over the bath.

The user sits on the seat from the side of the bath and then swivels over the bath for a wash or shower. The comfortable seat provides back and arm support and is ideal for people who feel insecure on a bath board.

The Swivel Bather rests on any standard bath. No fixtures or fittings are required and it is easily removed so that others can use the bath.

The Myco Swivel Bather® has two parts; a base frame that rests on the bath and a seat unit that rotates on the base. The two parts separate easily for handling and storage. Each part weighs 3.2kg. The Standard Swivel Bather is 28″ wide.

The seating unit has a plastic seat which is easy to clean and drainage holes sized for safety. The base frame has plastic ends and positioning screws to prevent movement.

The locking lever is located on the right hand side of the seat unit and locks in both the transfer and bathing positions.

Seats with a left hand locking lever can be manufactured to order.

The Swivel Bather® fits on any standard bath, no fixtures or fittings are required and the unit is easily removed when not required. Critical turning components (the base plate and swivel pin) are stainless steel on all models, which ensures long-term reliability without the need for servicing or lubrication. Weight limit up to 127kg.

The Swivel Bather has a base frame which fits over the bath and a seating unit which rotates on the base. The two parts each weigh 7lbs (3.2Kg).

Tubing is epoxy coated mild steel. All other metal components are stainless steel. In particular the critical turning components, the base plate and the swivel pin, are stainless steel and no servicing or lubrication is required.

The seating unit has an easy to clean plastic seat with drainage holes about 8 mm in diameter in keeping with the relevant British Standard.

The base frame has non-slip plastic ends which rest on the bath sides. Positioning screws on either side also help to prevent movement.

The locking lever is on the right hand side – left hand locking is available for all models on request.

Selecting a model:

To decide which model best suits your bath, measure the inside width near the top of the bath X and the outside width of the bath Y.

Model X (Inside bath width) Y (Outside bath width)
Standard (28″) 21″ to 25″ (535 – 635mm) 27″ to 31″ (685 to 785mm)
or more
Adjustable model 17″ to 27″ (430 – 685mm) 25″ to 30″ (635 to 785mm)

Seat Dimensions:

Seat width: 17½” (445mm)
Seat depth: 16″ (405mm)
Backrest height: 14″ (355mm)
Width between arm rests: 19″ (485mm)
Seat height above side of bath:   2″ (50mm)

Base Dimensions:

Distance between arms
(measured at outside edge of arms):
21″ (535mm)
Width over bath: 28″ (Standard model)
Adjustable width

Weight rating: 127kg (20 st)

Download Instruction Manual.