Myco Mobility

The lightweight walker benefits from an aluminium frame and 20cm castors, ergonomic handles, lock-on lever brakes, padded removable back rest, padded seat, and an under seat wallet and bag. Total weight limit: 127kg.

 

  • Height adjustable handles: 82.5cm-94cm
  • Overall width: 61cm
  • Width between arms: 52cm
  • Seat height: 50cm
  • Weight: 7kg

Download the Instruction Manual.

Myco Ultra Swivel Bather

The Ultra Swivel Bather is the latest in our range of Swivel Bathers. Made of aluminium for corrosion resistance and longevity, it has an increased user weight rating of 160kg. The locking lever can now also be changed to suit left or right handed users.

The Myco Swivel Bather Range has been enhanced by the development of the Ultra Swivel Bather, which is based on the popular adjustable width models. The Ultra Swivel Bather has the same method of width adjustment, by turning the grey end covers, and is still adjustable from 26″ to 30″. The product also still benefits from four “positioning screws” that secure against the inside walls of the bath, to offer added security and prevent the frame moving on the bath.

It has the following features:

  • Made from aluminium, therefore no corrosion,
  • Adjustable Width from 26” to 30″,
  • Wide arm,
  • Locks either left or right hand side,
  • Carries a person weighing up to 160kg.
  • Plus the Myco Ultra Swivel Bather only weighs 5kgs.

The seat height of the Ultra Swivel Bather can be raised by 100mm (4″) by fitting the Ultra Seat Raiser, with product code TWSR4.

  • Seat width: 445mm (17.5)
  • Backrest height: 355mm (14″)
  • Seat depth: 405mm (16″)
  • Width between arms: 535mm (21″)
  • Seat height above side of bath: 50mm (2″)
  • Distance between arms of base frame
 (Measured at outside edge of bath): 535mm (21″)
  • 
Max user weight rating: 160kg (25st)

Download the Instruction Manual.

Medici Pillow Lifter

The Medici Pillow Lifter helps the user turn their own bed into a hospital bed.

By touching a button, it will sit the user upright or lie down flat on top of the mattress. It can even be used on a double bed with a partner still using the other half of the bed.

The mattress pad has a vapour permeable, four-way stretch waterproof cover, which secures to the frame and a fitted polycotton sheet with a sewn-in pillow pocket plus a spare sheet for the wash.

The aluminium frame, mattress and covers weight 13kg. The strap may be used to attach the Pillow Lifter to the mattress/bed base if additional security is required.

Watch a video of the Medici Pillow Lifter.

  • Backrest size: 750mm wide, 720mm tall
  • Apron size: 750 mm wide, 280mm long
  • Angle of operation: 5 to 65 degrees
  • Weight limit: 190kg
Download Instruction Manual

Foldeasy Portable Toilet Frame

toilet-frame-2 Fold Easy Toilet Frame

The FoldEasy Portable Toilet Frame provides several unique features and is the first fully folding toilet frame in Australia.

Operated by two easy release mechanisms it folds in on itself making it fully portable. It can easily be placed in the boot of a car meaning that those who depend on it can now travel away and place it at the toilet that they will be using. This provides the user with a greater degree of independence.

The FoldEasy has a folding footplate that sits flush to the floor. When in use, the weight of the user standing on the footplate firmly holds the FoldEasy in place.

The FoldEasy has ergonomically designed arm rests which are at the optimum angle to aid the user to sit and stand with greater ease
and comfort. It is height adjustable making it suitable for all types of toilets. Weight limit up to 127kg.

Weight rating: 127kg (20 st)
Download Instruction Manual

Myco Standard Swivel Bather

The Swivel Bather is a turning bath seat that allows easy transfer over the bath.

The user sits on the seat from the side of the bath and then swivels over the bath for a wash or shower. The comfortable seat provides back and arm support and is ideal for people who feel insecure on a bath board.

The Swivel Bather rests on any standard bath. No fixtures or fittings are required and it is easily removed so that others can use the bath.

The Myco Swivel Bather® has two parts; a base frame that rests on the bath and a seat unit that rotates on the base. The two parts separate easily for handling and storage. Each part weighs 3.2kg. The Standard Swivel Bather is 28″ wide.

The seating unit has a plastic seat which is easy to clean and drainage holes sized for safety. The base frame has plastic ends and positioning screws to prevent movement.

The locking lever is located on the right hand side of the seat unit and locks in both the transfer and bathing positions.

Seats with a left hand locking lever can be manufactured to order.

The Swivel Bather® fits on any standard bath, no fixtures or fittings are required and the unit is easily removed when not required. Critical turning components (the base plate and swivel pin) are stainless steel on all models, which ensures long-term reliability without the need for servicing or lubrication. Weight limit up to 127kg.

The Swivel Bather has a base frame which fits over the bath and a seating unit which rotates on the base. The two parts each weigh 7lbs (3.2Kg).

Tubing is epoxy coated mild steel. All other metal components are stainless steel. In particular the critical turning components, the base plate and the swivel pin, are stainless steel and no servicing or lubrication is required.

The seating unit has an easy to clean plastic seat with drainage holes about 8 mm in diameter in keeping with the relevant British Standard.

The base frame has non-slip plastic ends which rest on the bath sides. Positioning screws on either side also help to prevent movement.

The locking lever is on the right hand side – left hand locking is available for all models on request.

Selecting a model:

To decide which model best suits your bath, measure the inside width near the top of the bath X and the outside width of the bath Y.

Model X (Inside bath width) Y (Outside bath width)
Standard (28″) 21″ to 25″ (535 – 635mm) 27″ to 31″ (685 to 785mm)
or more
Adjustable model 17″ to 27″ (430 – 685mm) 25″ to 30″ (635 to 785mm)

Seat Dimensions:

Seat width: 17½” (445mm)
Seat depth: 16″ (405mm)
Backrest height: 14″ (355mm)
Width between arm rests: 19″ (485mm)
Seat height above side of bath:   2″ (50mm)

Base Dimensions:

Distance between arms
(measured at outside edge of arms):
21″ (535mm)
Width over bath: 28″ (Standard model)
Adjustable width

Weight rating: 127kg (20 st)

Download Instruction Manual.

Myco Swivel Bather Adjustable Width

The Myco Adjustable Width Swivel Bather is a turning bath seat that allows easy transfer over the bath. The user sits on the seat from the side of the bath and then swivels over the bath for a wash or shower. The comfortable seat provides back and arm support and is ideal for people who feel insecure on a bath board.

The Myco Adjustable Width Swivel Bather rests on any standard bath. No fixtures or fittings are required and it is easily removed so that others can use the bath.

The Myco Adjustable Width Swivel Bather® has two parts; a base frame that rests on the bath and a seat unit that rotates on the base. The two parts separate easily for handling and storage. Each part weighs 3.2kg. The Myco Swivel Bather is adjustable from 26″ to 30″ to fit a range of domestic baths.

The seating unit has a plastic seat which is easy to clean and drainage holes sized for safety. The base frame has plastic ends and positioning screws to prevent movement.

The locking lever is located on the right hand side of the seat unit and locks in both the transfer and bathing positions. Seats with a left hand locking lever can be manufactured to order.

Critical turning components (the base plate and swivel pin) are stainless steel on all models, which ensures long-term reliability without the need for servicing or lubrication.

The base frame can easily be adjusted to fit a range of bath widths by turning the grey arm handles. This makes it the ideal product for OT’s to use for home assessments and also for equipment stores where one product will suit most bath widths.

For the home user who uses the Swivel Bather when traveling – the Myco Adjustable Width Swivel Bather will provide the adaptability required to fit other baths including most hotel baths.

Another advantage of the adjustable width bather is that the gap between the seat and the bath edge can be reduced. The seat can be set closer to the front edge of the bath by shortening the arms resting on the front edge of the bath and lengthening the arms resting on the side nearest the wall.

Easy to adjust:

The standard models are all constructed using epoxy coated mild steel and are suitable for users weighing up to 120Kg.

NOTE: A Stainless Steel Myco Heavy Duty Swivel Bather is now available, for users up to 160kg.

The Myco Adjustable Width Swivel Bather has a base frame which fits over the bath and a seating unit which rotates on the base. The two parts separate easily – each part weighs about 3.2Kg.

The grey handles of the base frame can be turned to increase or decrease the width of the base. This allows the base width to be varied from 26″ to 30″ (660 – 760mm) to cover most bath sizes.

Tubing is epoxy coated mild steel. All other metal components are stainless steel. In particular the critical turning components, the base plate and the swivel pin, are stainless steel and no servicing or lubrication is required.

The seating unit has an easy to clean plastic seat with drainage holes sized for safety.

The base frame has non-slip plastic ends which rest on the bath sides. Two positioning screws on either side also help to prevent movement.

The locking lever is on the right hand side – left hand locking is available.

Seat Dimensions:

Seat width: 17½”(445mm)
Seat depth: 16″ (405mm)
Backrest height: 14″ (355mm)
Width between arm rests: 19″ (485mm)
Seat height above side of bath: 2″ (50mm)

Base Dimensions:

Distance between arms
(measured at outside edge of arms):
21″ (535mm)
Width over bath: 26″ – 30″ (660 – 760mm)

Step 1 – Adjusting the width of the base frame

Adjust the length of each arm of the base frame by turning the grey handles:

The width of the base can be adjusted from 26″ (660mm) to 30″ (760mm).

Step 2 – Fitting the base frame over the bath

Rest the base frame securely on the bath. At least 1¼ inch (30mm) of each arm must rest on the sides of the bath. Turn the positioning screws on both sides until the black rubber ends are just touching the sides of the bath.

Step 3 – Fitting the seat

Place the seat on the base frame. The socket under the seat locates over the swivel pin of the base frame. Ensure that the seat rotates freely. Lock the seat by pushing the black knob on the locking lever gently down until the lock locates in the slots in the base frame.

 

 

 

Download Instruction Manual

Myco Heavy Duty Adjustable Width Swivel Bather

The frame of the Myco Heavy Duty Adjustable Width Swivel Bather is made from Stainless Steel for additional strength and is weight rated to 160kg.

The Myco Heavy Duty Swivel Bather is a turning bath seat that allows easy transfer over the bath. The user sits on the seat from the side of the bath and then swivels over the bath for a wash or shower. The comfortable seat provides back and arm support and is ideal for people who feel insecure on a bath board.

The Myco Heavy Duty Swivel Bather rests on any standard bath. No fixtures or fittings are required and it is easily removed so that others can use the bath.

The Myco Heavy Duty Swivel Bather has two parts; a base frame that rests on the bath and a seat unit that rotates on the base. The two parts separate easily for handling and storage. Each part weighs 3.2kg. The unit is adjustable in width from 26″ to 30″, so that it fits a range of domestic baths.

The seating unit has a plastic seat which is easy to clean and drainage holes sized for safety. The base frame has plastic ends and positioning screws to prevent movement.

The locking lever is located on the right hand side of the seat unit and locks in both the transfer and bathing positions. Seats with a left hand locking lever can be manufactured to order.

Critical turning components (the base plate and swivel pin) are stainless steel on all models, which ensures long-term reliability without the need for servicing or lubrication.

The Myco Heavy Duty Adjustable Width Swivel Bather has weight rating of 160kg and the frame is made from Stainless Steel for additional strength.

It has a base frame which fits over the bath and a seating unit which rotates on the base. The two parts separate easily – each part weighs about 3.2Kg.

The grey handles of the base frame can be turned to increase or decrease the width of the base. This allows the base width to be varied from 26″ to 30″ (660 – 760mm) to cover most bath sizes.

Tubing is epoxy coated mild steel. All other metal components are stainless steel. In particular the critical turning components, the base plate and the swivel pin, are stainless steel and no servicing or lubrication is required.

The seating unit has an easy to clean plastic seat with drainage holes sized for safety.

The base frame has non-slip plastic ends which rest on the bath sides. Two positioning screws on either side also help to prevent movement.

The locking lever is on the right hand side – left hand locking is available.

Seat Dimensions:

Seat width: 17½”(445mm)
Seat depth: 16″ (405mm)
Backrest height: 14″ (355mm)
Width between arm rests: 19″ (485mm)
Seat height above side of bath: 2″ (50mm)

Base Dimensions:

Distance between arms
(measured at outside edge of arms):
21″ (535mm)
Width over bath: 26″ – 30″ (660 – 760mm)

 

Step 1 – Adjusting the width of the base frame

Adjust the length of each arm of the base frame by turning the grey handles:

The width of the base can be adjusted from 26″ (660mm) to 30″ (760mm).

Step 2 – Fitting the base frame over the bath

Rest the base frame securely on the bath. At least 1¼ inch (30mm) of each arm must rest on the sides of the bath. Turn the positioning screws on both sides until the black rubber ends are just touching the sides of the bath.

Step 3 – Fitting the seat

Place the seat on the base frame. The socket under the seat locates over the swivel pin of the base frame. Ensure that the seat rotates freely. Lock the seat by pushing the black knob on the locking lever gently down until the lock locates in the slots in the base frame.
Download Instruction Manual.

Myco Corner Swivel Bather

Similar to the other Myco Swivel Bathers, but is designed to fit a corner bath.

The Swivel Bather is a turning bath seat that allows easy transfer over the bath. The user sits on the seat from the side of the bath and then swivels over the bath for a wash or shower. The comfortable seat provides back and arm support and is ideal for people who feel insecure on a bath board.

The Swivel Bather for Corner Baths rests on any corner bath. The base has extendable tubes which are easily adjusted to accommodate most corner baths. It is easily removed so that others can use the bath.

The Swivel Bather for corner baths is made up of two parts: A base frame which rests on the sides of the bath and a seating unit which rotates on the base. The two parts separate easily for handling or storage.

The seating unit has a plastic seat with small drainage holes and is easy to clean. The base frame has four arms which rest on the bath. Each of these has a non-slip rubber end- covering. There is also an adjustable positioning screw to prevent accidental slipping. At least 1¼” (30mm) of each arm must rest securely on each side of the bath.

The seat locks in both the transfer (facing the side) and the showering position (facing over the bath tub). The locking lever is on the right hand side of the seat but all models can be requested with the lever on the left hand side.

Extendable support tubes are separately adjusted to accommodate the shape of the bath. The extended tubes are kept in place by a single bolt and nut which will require a spanner to tighten. The supporting arms are adjustable from 810mm to 1200mm (32″ to 47″) and the bath must have appropriate flat surfaces for the support arms to rest on.

If the top edge of the bath is shaped with a cut-out in the outer wall to reduce the height of the wall you have to step over to enter the bath, it will not be possible to fit the Corner Bather. Similarly, if the top edge of the bath where it meets the wall has any shaped features, it may also prevent fitting the Corner Bather.

The seat height is 3½” (90mm) above the sides of the bath.

All metal parts are stainless steel.

Weight of base unit including extension tubes is 14.5 lbs (6.5kg). Suitable for users up to 23 stone (150Kg).

This model can also be used for very wide baths with a width greater than 32″ (810mm).

Weight rating: 150kg

Swivel Bather for Corner Baths | Instructions

Step 1 – Assemble the Base

close up of plastic end coversRemove the screws from the base frame tubes. Slide the two extension tubes into the base frame as shown. (Line up the twin holes in the extension tubes with the multiple holes in the base frame tube.)

Place the base frame over the bath with the plastic end covers resting on the front of the bath.

 

illustration of fittingISlide the extension tubes out so that the plastic ends rest on the back edge of the bath and touch the back walls. In selecting the most suitable position ensure that the front of the base frame and the ends of the extension tubes each have a minimum of 1¼” (30mm) resting on the sides of the bath.

Place the seating unit over the pin on the base frame and adjust the unit into the position required. Ensure that the seat rotates and the locking device engages without any obstruction. (Do not sit on the seat at this stage.)

Having now determined the correct length of the two extension tubes, remove the seating unit and align one of the twin holes in each extension tube with the nearest hole in the base frame. Insert the screw provided and secure with the nut with a spanner.

It is important that the screw is inserted from the outside of the frame so that the nut, which protrudes, is on the inside. The nut must be tightened until the end of the screw protrudes through the nut.

Step 2 – Fitting over the bath

illustration of partsCheck again that the unit fits safely over the bath. If required the base length can be adjusted by choosing a more suitable hole in the extension tube.

Replace the seating unit.

Adjust the positioning screw at the front of the base frame so that the black rubber end is just touching the inside of the bath.

The Swivel Bather is now ready for use.

Step 3 – Using the Swivel Bather

Swivel the seat to face the side of the bath and lock into position. The user can now be seated.

Unlock the seat by lifting the locking lever and transfer legs over the side of the bath.

Lock the seat while over the bath for extra security while washing or showering.

Maximum user weight is 20 stone (150kg)

Download Instruction Manual

Myco Ultra Swivel Shower Chair

The Ultra Swivel shower Chair has the same seating unit as the Ultra Swivel Bather. The seat fits onto a floor standing base unit, can swivel through 360° and locks at 90° intervals. The seat frame and base frame are both made from aluminium.

The base has adjustable legs fitted with slip-resistant ferrules and allows a seat height range from 18.5″ (470mm) to 21.5″ (550mm) in 1″ (25mm) increments.

Dimensions:
Seat width: 445mm (17.5″)
Backrest height: 355mm (14″)
Seat depth: 405mm (16″)
Width between arms: 480mm (19″)
Footprint at min height: 450 x 505MM (18″ x 20″)
Footprint at max height: 570 x 570MM (22.5″ x 22.5″)
Max user weight rating: 160kg (25st)

Note: The Ultra Swivel Shower Chair cannot be used with the Ultra Seat Raiser

Weight rating: 160kg (25 stone)

Download Instruction Manual.

Myco Wall Bracket Accessory

When fitting a Swivel Bather or bathboard, there has to be sufficient support from the bath to securely fit the product. In some instances, where the bath has been set into the wall, or if the wall has been tiled, the lip on the bath may not be wide enough to provide the required support.

The stainless steel Myco Wall Bracket is designed to support a Swivel Bather when the lip on the wall side of the bath is less than the recommended 1¼ inches (30mm).

When using a Swivel bather it needs at least 1¼ inches (30mm) of each arm of the base unit to rest on the bath sides.

The wall bracket is located so that it rests on the edge of the bath and is secured to the wall using suitable fixings. When fixing the wall bracket to the wall, the same considerations apply as for the fixing of grab rails.

The wall bracket is 560mm long, with an array of screw holes to allow a good fixing to the wall with appropriate fittings (screws & wall plugs not supplied) and the lip is 45mm wide.

The Myco Wall Bracket is constructed from epoxy coated stainless steel. The dimensions are 22″ x 3″ x 1.75″ (560mm x 80mm x 45mm).

Step 1 The Myco Wall Bracket

The Wall Bracket is designed to support a Swivel Bather™ when the lip on the wall side of a bath is too narrow (less than 1¼ inch 30mm). It is suitable for use with all Myco Swivel Bather models.

2. Fitting the wall bracket

The wall Bracket is attached to the wall as shown:

Fixings will depend on the wall constructions. Stainless steel fixings are recommended

Choose either the small or large holes in the bracket and attach the bracket to the wall using 6 fixings
Download Instruction Manual